A Gas Safety Certificate from B.E.S.T Ltd consists of: 
• All gas appliances being checked for gas tightness, 
• Standing and working pressure will be tested; subject to Test Point Availability, 
• Burner pressure and gas rate against the manufacturers data plate, 
• Checks will be carried out for the provision of all necessary ventilation, 
• Flue flow will be tested to make sure products of combustion are removed, 
• All flame failure devices will be checked for satisfactory operation, 
• Where appropriate checks will be made for physical stability, presence and effectiveness of 
stability brackets, 
• Investigations for any evidence of unsafe operation will be made and reported. 
Without completing all of the above checks an appliance can not be issued a Gas Safety Certificate. 

What information does the Landlords Gas Safety record contain? 

• The description and location of each appliance and/or flue checked, 
• Name, registration number and signature of the engineer who carried out the check, 
• Date on which the appliance and/or flue was checked, 
• The address of the property at which the appliance and /or flue is installed, 
• The name and address of the landlord (or his agent where appropriate), 
• Any defect identified and any action required or taken to fix it, 
• Confirmation of the results of operational safety checks carried out on the appliances. 

Gas Law 

By law a landlord, under the Gas Safety (Installation and Use) Regulations 1998, is responsible to get a Gas Safety Certificate every twelve months. You can get this from a B.E.S.T Ltd Gas Safe Registered engineer for all pipe work, gas appliances and flues installed at your property. 
Our site uses cookies. For more information, see our cookie policy. ACCEPT COOKIES MANAGE SETTINGS